Please use this identifier to cite or link to this item: https://olympias.lib.uoi.gr/jspui/handle/teiep/13049
Full metadata record
DC FieldValueLanguage
dc.contributor.authorΚουτσός, Χρήστοςel
dc.contributor.authorΣκαλτσώνης, Λεωνίδαςel
dc.date.accessioned2021-09-15T05:19:34Z-
dc.date.available2021-09-15T05:19:34Z-
dc.date.issued2021-09-15-
dc.identifier.urihttps://olympias.lib.uoi.gr/jspui/handle/teiep/13049-
dc.rightsΑναφορά Δημιουργού-Μη Εμπορική Χρήση-Όχι Παράγωγα Έργα 3.0 Ελλάδα*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/gr/*
dc.subjectΦωτοβολταϊκάel
dc.subjectSolar insolationel
dc.subjectLabView VI της National Instrumentsel
dc.subjectLux, lumenel
dc.titleΣχεδίαση και ανάπτυξη συστήματος αξιολόγησης επιδόσεων Φ/Β στοιχείων.el
heal.typebachelorThesis-
heal.classificationΦωτοβολταϊκάel
heal.identifier.secondaryΠτυχιακή Εργασία-
heal.dateAvailable2024-01-11T22:04:29Z-
heal.languageel-
heal.accessfree-
heal.recordProviderΤ.Ε.Ι. Ηπείρουel
heal.publicationDate2021-
heal.bibliographicCitationΚουτσός, Χ., & Σκαλτσώνης, Λ., 2021. Σχεδίαση και ανάπτυξη συστήματος αξιολόγησης επιδόσεων Φ/Β στοιχείων. Πτυχιακή εργασία. Άρτα: Τ.Ε.Ι. Ηπείρου. Σχολή Τεχνολογικών Εφαρμογών. Τμήμα Μηχανικών Πληροφορικής Τ.Ε.el
heal.abstractΣτην παρούσα πτυχιακή εργασία θα γίνει μελέτη της απόδοσης φωτοβολταϊκών εσωτερικών χώρων. Στο πρώτο κεφάλαιο θα οριστεί το φωτοβολταϊκό φαινόμενο, θα γίνει μια ιστορική αναδρομή, θα αναλυθεί τόσο το φωτοβολταϊκό φαινόμενο αλλά και η αρχιτεκτονική ενός φωτοβολταϊκού στοιχείου. Στη συνέχεια θα γίνει αναφορά στους όρους solar insolation, radiation και θα παρουσιαστούν οι διαφορές τους. Επίσης, θα γίνει αναφορά στα φωτοβολταϊκά, τις τεχνολογίες και τα υλικά από τα οποία είναι κατασκευασμένα, τόσο τα indoor αλλά και τα outdoor φωτοβολταϊκά. Τέλος, θα γίνει λόγος για τις μονάδες μέτρησης lux, lumen, και candela και πως σχετίζονται αυτά μεταξύ τους. Στο δεύτερο κεφάλαιο θα γίνει αναφορά στα συστήματα ανάλυσης φωτοβολταϊκών παραμέτρων και πιο συγκεκριμένα για τα υποσυστήματα εξομοίωσης και μετρήσεων φάσματος. Στο τρίτο κεφάλαιο θα μελετηθούν οι πειραματικές διατάξεις. Θα γίνει ανάλυση του state of the art και παρόμοιων κατασκευών, οι οποίες συμβάλλανε στην κατασκευή της δικής μας πειραματικής διάταξής, που θα αναλυθεί σε επόμενο κεφάλαιο. Τέλος, θα γίνει αναφορά στα υποσυστήματα επεξεργασίας, το υλικό και το λογισμικό. Στο τέταρτο κεφάλαιο, θα αναλυθεί η πειραματική διάταξη που κατασκευάστηκε. Αρχικά, το μηχανολογικό κομμάτι. Έπειτα, θα γίνει αναφορά στις πηγές φωτισμού που χρησιμοποιήθηκαν στη κατασκευή. Τέλος, θα μελετηθεί το σύστημα ελέγχου και το σύστημα αισθητήρων που χρησιμοποιήθηκαν. Στο πέμπτο κεφάλαιο θα περιγραφεί η διαδικασία των μετρήσεων. Θα γίνει αναφορά στο λογισμικό LabView VI της National Instruments, το οποίο χρησιμοποιήθηκε για την διαχείριση και τον έλεγχο των εργαστηριακών οργάνων τα οποία χρησιμοποιήθηκαν. Στο έκτο κεφάλαιο, θα παρουσιαστούν τα αποτελέσματα των μετρήσεων και θα γίνει συζήτηση των αποτελεσμάτων. Στο έβδομο και τελευταίο κεφάλαιο της παρούσας εργασίας, θα γίνει συζήτηση της συνολικής εμπειρίας κατασκευής μιας τέτοιας διάταξης, θα συζητηθούν τυχών προβλήματα και θα παρουσιαστούν μελλοντικές αναβαθμίσεις.el
heal.abstractIn the present dissertation, the efficiency of photovoltaic interiors will be studied. The first chapter will define the photovoltaic phenomenon, a historical review will be noticed, the analyzation of both the photovoltaic phenomenon and the architecture of a photovoltaic cell will be made. Following this, the terms solar insolation and radiation will be referred, and their differences will be presented. Also, reference will be made to photovoltaics, technologies and materials from which they are made, both indoor and outdoor photovoltaics. Finally, the units of measurement lux, lumen, and candela will be analyzed and how they are related to each other. The second chapter will refer to photovoltaic parameter analysis systems and more specifically to the simulation and spectrum measurement subsystems. In the third chapter the experimental devices will be studied. An analysis in the state of the art and similar constructions will be made, which contributed to the construction of the experimental device that will be analyzed in the next chapter. Finally, reference will be made to processing subsystems, hardware and software. In the fourth chapter, the experimental device constructed will be analyzed. First, the mechanical part. After that, reference will be made to the light sources used in the construction. Finally, the control system and the sensor system used will be examined. The fifth chapter will describe the measurement process. LabView VI software by National Instruments will be presented. This software was used to manage and control the laboratory instruments. In the sixth chapter, the results of the measurements will be presented, and the results will be discussed. In the seventh and final chapter of the present work, the overall experience of constructing such a device will be discussed, any problems will be examined, and future upgrades will be presented.el
heal.advisorNameΔουμένης, Γρηγόριοςel
heal.committeeMemberNameΓλαβάς, Ευριπίδηςel
heal.committeeMemberNameΒαρτζιώτης, Φώτιοςel
heal.academicPublisherΤ.Ε.Ι. Ηπείρου, Σχολή Τεχνολογικών Εφαρμογών, Τμήμα Μηχανικών Πληροφορικής Τ.Ε.el
heal.academicPublisherIDteiep-
heal.numberOfPages88-
heal.fullTextAvailabilitytrue-
Appears in Collections:Προπτυχιακές εργασίες Τμ. Μηχανικών Πληροφορικής Τ.Ε.

Files in This Item:
File Description SizeFormat 
Πτυχιακη εργασία Final.pdfΠτυχιακή Εργασία2.71 MBAdobe PDFView/Open


This item is licensed under a Creative Commons License Creative Commons