Please use this identifier to cite or link to this item: https://olympias.lib.uoi.gr/jspui/handle/123456789/9538
Full metadata record
DC FieldValueLanguage
dc.contributor.authorGalanos, E. K.en
dc.contributor.authorPetrakis, D. E.en
dc.contributor.authorStathopoulos, V. N.en
dc.contributor.authorPomonis, P. J.en
dc.contributor.authorLabou, D. P.en
dc.contributor.authorSdoukos, A. T.en
dc.date.accessioned2015-11-24T16:49:52Z-
dc.date.available2015-11-24T16:49:52Z-
dc.identifier.issn1463-9076-
dc.identifier.urihttps://olympias.lib.uoi.gr/jspui/handle/123456789/9538-
dc.rightsDefault Licence-
dc.subjectcatalytic activityen
dc.subjectoxidizing conditionsen
dc.subjectexhaust catalystsen
dc.subjectcarbon-monoxideen
dc.subject3-way catalystsen
dc.subjectnoble-metalsen
dc.subjectrare-earthen
dc.subjectoxideen
dc.subjectbehavioren
dc.subjectmethaneen
dc.titleSynthesis, structure and surface properties of some mesoporous cero-phosphoro-aluminatesen
heal.typejournalArticle-
heal.type.enJournal articleen
heal.type.elΆρθρο Περιοδικούel
heal.identifier.primaryDoi 10.1039/B201310j-
heal.identifier.secondary<Go to ISI>://000176907400050-
heal.identifier.secondaryhttp://pubs.rsc.org/en/Content/ArticleLanding/2002/CP/b201310j-
heal.languageen-
heal.accesscampus-
heal.recordProviderΠανεπιστήμιο Ιωαννίνων. Σχολή Θετικών Επιστημών. Τμήμα Χημείαςel
heal.publicationDate2002-
heal.abstractMesoporous cero-phosphoro-aluminates (Al100PXCeY, X, Y = 0, 5, 10, 20) have been prepared and characterized by XRD analysis, surface area and porosity measurements, XPS analysis and surface acidity determination. The preparation of the Al100PXCeY solids took place in an aqueous environment with NH3 as precipitating agent and heating at 600 degreesC. The addition of phosphorus leads to an increase in the specific surface area (SSA) of the gamma-Al2O3 parent solid from 230 to 390 m(2) g(-1) and the formation of amorphous aluminophosphates. The addition of cerium does not result in its incorporation into the alumina or the aluminophosphate solids but a separate phase of CeO2 is formed at X, Y < 20 while at X, Y = 20 CePO4 becomes apparent. At the same time the specific surface area drops from 230-390 m(2) g(-1) to 170-180 m(2) g(-1) depending on the sample. All the Al100PXCeY samples are truly mesoporous with mean pore diameters around 6-10 nm and full width at half maximum (FWHM) of the pore size distribution at 3-7 nm. The size of the crystallites of CeO2 (Sherrer relationship) is around 4-8 nm depending on the sample. The surface acid density, determined by NH3 adsorption, increases linearly with the addition of phosphates from 5 x 10(17) sites m(-2) for X = 0 to 13 x 10(17) sites m(-2) for X = 20, while it is practically invariant on addition of cerium. The XPS analysis showed that the surface of those porous materials is highly enriched in cerium as compared to the nominal solid composition. The enrichment is more substantial in pure alumina, reaching relative values of 100-150%, and decreases with the addition of phosphorus, where the relative enrichment is 30-60%. The surface of the solids without or with the addition of a small amount of cerium (Y = 0,5,10) is moderately enriched in phosphorus (10-30%) while for high cerium content (Y = 20) the surface is moderately depleted of phosphorus to 14-23%. The surface enrichment, or depletion, in phosphorus and/or cerium is corroborated by linear relationships between the surface composition (XPS) and the acidity (TPD NH3) in the case of phosphorus or the intensity of the main reflection in XRD of CeO2 in the case of cerium.en
heal.publisherThe Royal Society of Chemistryen
heal.journalNamePhysical Chemistry Chemical Physicsen
heal.journalTypepeer reviewed-
heal.fullTextAvailabilityTRUE-
Appears in Collections:Άρθρα σε επιστημονικά περιοδικά ( Ανοικτά). ΧΗΜ

Files in This Item:
There are no files associated with this item.


This item is licensed under a Creative Commons License Creative Commons