Please use this identifier to cite or link to this item:
https://olympias.lib.uoi.gr/jspui/handle/123456789/13903
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Zois, D. | en |
dc.contributor.author | Lekatou, A. | en |
dc.contributor.author | Vardavoulias, M. | en |
dc.date.accessioned | 2015-11-24T17:33:52Z | - |
dc.date.available | 2015-11-24T17:33:52Z | - |
dc.identifier.issn | 0257-8972 | - |
dc.identifier.uri | https://olympias.lib.uoi.gr/jspui/handle/123456789/13903 | - |
dc.rights | Default Licence | - |
dc.subject | plasma spraying | en |
dc.subject | sintering | en |
dc.subject | x-ray diffraction | en |
dc.subject | mechanical properties | en |
dc.subject | aluminium oxide coatings | en |
dc.subject | nanostructure | en |
dc.subject | partially-stabilized zirconia | en |
dc.subject | alumina-titania coatings | en |
dc.subject | nanocrystalline materials | en |
dc.subject | alumina/titania coatings | en |
dc.subject | tribological properties | en |
dc.subject | nanophase materials | en |
dc.subject | feedstock powders | en |
dc.subject | liquid precursors | en |
dc.subject | plasma | en |
dc.subject | wear | en |
dc.title | A microstructure and mechanical property investigation on thermally sprayed nanostructured ceramic coatings before and after a sintering treatment | en |
heal.type | journalArticle | - |
heal.type.en | Journal article | en |
heal.type.el | Άρθρο Περιοδικού | el |
heal.identifier.primary | DOI 10.1016/j.surfcoat.2009.06.013 | - |
heal.identifier.secondary | <Go to ISI>://000270639800002 | - |
heal.language | en | - |
heal.access | campus | - |
heal.recordProvider | Πανεπιστήμιο Ιωαννίνων. Σχολή Θετικών Επιστημών. Τμήμα Μηχανικών Επιστήμης Υλικών | el |
heal.publicationDate | 2009 | - |
heal.abstract | Coatings have been deposited by air plasma spraying of alumina powders in the form of conventional particles (C), nanostructured agglomerates (N) and sintered-nanostructured agglomerates (S). Sintering alleviated the stresses introduced in the nanopowder by the manufacturing process (high energy ball milling). The coating porosity is a direct consequence of the powder melting degree, which is related to the feedstock porosity. The mechanical performance of the coatings is also closely associated with the powder melting degree. The N coatings present the highest surface roughness due to the lowest melting degree. The slightly higher hardness values of the N and S coatings, as compared to the C coatings, are attributed to the higher percentages of alpha-Al(2)O(3) and the presence of nanostructure. The S coatings exhibit superior adhesion strength, relative fracture toughness and wear resistance, due to sintering consequences (intraparticle cohesion, strain relief, tough splat boundaries), random dispersion of coherent nanozones and stress dissipation at nanograin boundaries. (C) 2009 Elsevier B.V. All rights reserved. | en |
heal.publisher | Elsevier | en |
heal.journalName | Surface & Coatings Technology | en |
heal.journalType | peer reviewed | - |
heal.fullTextAvailability | TRUE | - |
Appears in Collections: | Άρθρα σε επιστημονικά περιοδικά ( Ανοικτά) |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Lekatou-2009-A microstructure and mechanical.pdf | 2.84 MB | Adobe PDF | View/Open Request a copy |
This item is licensed under a Creative Commons License